The Products
Choose by simply clickingon a product title below:
- Off-Grid Power Systems
- Combined Heat & Power (CHP)
- Futurenergy 1kW Wind Turbine
- Uninterruptible Power Supplies (UPS)
- Silent Electrical Generators
- Mains Failure Standby Systems
- Diesel and Gas Generators
- Generator Efficiency Control Systems
- Customised UPS Bypass Switches
- Valve Regulated Lead Acid Batteries
- Charger Systems
You are here:
Home
>
Mains Failure Standby Systems
>
Powerguard Mains Standby Systems
>
Powerguard MS System
Powerguard MS System
MS Mains Standby Systems are designed to automatically provide 230V AC electrical power when the utility mains supply fails offering a greener alternative to diesel powered standby power.
Provides high quality 230V AC Mains
The Powerguard MS System provides a low distortion 230VAC 50Hz sine-wave which in many cases is of better quality than the utility mains supply. This allows you to continue to use all your mains electrical equipment during power cuts. The length of time that electrical supply can be provided depends on the amount of battery power chosen by the customer.
Simple & Reliable Components
The MS System incorporates a charger, inverter, battery pack and Powerguard control system. The charger is designed to allow a rapid recharge of the batteries. The inverter converts the power from the battery pack into 230V AC mains, and the control system continuously monitors the mains power supply poised for activation.
Silent Operation
The MS System is designed to be over 98% efficient with a typical 10kW system consuming only 128W during normal operation. Designed to recharge a fully discharged battery to over 80% of full capacity within 12 hours, the MS System can be located almost anywhere due to its silent operation, small space requirements, hands-off operation, and long operating life. MS Systems are available with Power ratings from 100VA to 30kVA single phase and 3kVA to 100kVA three phase.
FOR MORE INFORMATION CALL US NOW ON 01507 600688
